Home › Current Small Business Issues › Fuel Costs

Dr. Paul Borosky, DBA, MBA, Business Consultant
Dr. Paul Borosky, DBA, MBABusiness Consultant

How Do I Keep Fuel Costs From Eating My Profit?

Three jobs today: one north, one south, one back north. Your crew spent more of the day on the road than on the work. Dr. Paul Borosky, DBA, MBA, Business Consultant, treats that drive time as a process you can redesign, not a cost you live with. Fuel is only the part you see. Wages and wear ride along on every mile. Here is how three route-based trades lose money on the road and what each can do about it.

Stage 1 of 3: Organize

You keep fuel from eating your profit by knowing what travel costs per job and planning routes around it. That makes this an Organize problem, stage one of the three in Dr. Paul’s Organize-Plan-Grow™ Strategy. Organize means tracking miles, fuel and drive time until the pattern is clear. A business consultant reviews your routes and service area and helps you price the distance in.

Questions? Reach Dr. Paul at (321) 948-9588. Your first 15 minutes cost nothing.

Doctor Owl in Plain English

How Do I Cut What I Spend on Fuel?

You cannot control the price at the pump. You can control how far you drive. Group jobs that are close together. Stop crossing town twice in one day. Charge more for stops far outside your normal area. Fewer miles saves fuel, wages and wear on the truck.

New here? Doctor Owl is a character from Dr. Paul’s Fabled Forest books. His short answers on this site are real business advice.

The Full Answer

What Are the Steps to Cut Fuel and Travel Costs?

Do them in this order.

  1. Group jobs by area. Give each part of your territory its own days of the week.
  2. Set an order cutoff. Take requests by a set hour for the next day so you can plan the route before anyone drives.
  3. Add a trip charge. Draw a line around your normal area. Outside it, charge for the drive.
  4. Raise your minimum for far jobs. A small job a long way off should cost enough to be worth the trip.
  5. Check tire pressure and idling. Both waste fuel quietly. A weekly check and a no-idling rule cost nothing.

What This Means for Your Business

How Do Fuel and Travel Costs Hit Different Route Businesses?

Fuel is the part of travel cost you see. The bigger part is time, because a worker in a truck is on the clock and earning you nothing. Then comes wear. Each trade wastes miles in its own way.

In pest control

The business is recurring stops, so route order decides the day. New accounts get booked into the first open slot, and a tech ends up crossing town for one stop. The guide on planning routes to cut drive time gives each part of town its own day.

In moving and delivery

The quote covers the move and forgets the road. Drive time to the job, the trip back to the yard, stairs and long carries all take hours the customer was never charged for. See pricing moving jobs so you do not underquote.

In HVAC and plumbing

Emergency calls blow up the plan. One urgent job bumps three others, and the trucks zigzag for the rest of the day. The guide on keeping the schedule from falling apart builds open slots in on purpose.

Pest control loses miles in how stops are booked. Movers lose them in how jobs are quoted. HVAC loses them when the schedule breaks. Find which one is yours, because the repair is different for each.

What to Measure

Which Travel Benchmark Fits My Kind of Route?

Every business with a vehicle should know its cost per mile. Add up fuel, maintenance, insurance and the vehicle payment for a month and divide by the miles driven. Until you have your own number, the IRS business rate is a fair stand-in. Then track what your trade wastes most.

TradeBenchmark to watchHow to read it
Pest controlMiles and drive hours per techMeasure both for two weeks to set a baseline, then check monthly. For a rough cost, the IRS standard mileage rate for 2026 is 72.5 cents a mile, before you count the tech’s wages.
Moving and deliveryQuoted hours against actual hours, job by jobRecord both on every job, along with stairs, carries and delays. Compare monthly. If actual runs over quoted, your crew speed figure is out of date.
HVAC and plumbingSchedule changes per weekLog each bump for two weeks: what moved, what moved it and why. Fewer bumps means fewer wasted trips.

Run a quick test with the mileage rate. A 40-mile round trip is about $29 at 72.5 cents a mile, and that is before an hour of wages. On a small job, that can be most of the profit.

Any other route business can start the same way: log one vehicle’s miles, fuel and drive time for a week and mark every trip that crossed your territory twice.

How a Business Consultant Can Help

How Does Business Process Improvement Consulting Cut Wasted Miles?

Wasted miles are a process problem, so the service that fits is Dr. Paul’s business process improvement consulting. It finds the steps that waste time, cause errors or slow the work down, then redesigns them.

Dr. Paul follows the work from start to finish and times each step, to see where it waits, where it goes wrong and what that costs. Then the process gets redesigned with the people who do the work: fewer steps and handoffs, the right tools and written procedures everyone follows the same way. The new process is run and measured, one process at a time, so the work keeps moving while it changes.

Here is how that looks in each trade.

  • Pest control: the booking step changes. Zip codes are grouped into zones, each zone gets a weekday and new accounts are sold into that day.
  • Moving and delivery: the quoting step changes. Quotes come from a full inventory and your own crew’s speed, with priced charges for stairs, long carries and travel.
  • HVAC and plumbing: the dispatch step changes. One person owns the board, open slots are held each day and written rules say what can bump what.

The trucks keep rolling the whole time. Dr. Paul delivers it on site or over Zoom.

A practical deliverable

A redesigned workflow for routing, quoting or dispatch, with written steps your whole team follows.

Current signal: the rank for fuel costs this month is on the top 10 small business problems countdown.

Start Here

What Is My First Move?

Pick one vehicle. Log its miles, fuel and drive time for a week, and mark every trip that crossed your territory twice.

Not open yet? Draw your service area on a map before you take the first call, and set a trip charge for anything outside it. A business plan template helps you cost it out.

On the management team? Dispatchers and crew leads can run the one-week log. You already know which days were a mess.

Dr. Paul Borosky, DBA, MBA, Business Consultant

Dr. Paul’s Take

Say No to the Far Job, or Price It Right

Dr. Paul’s point to owners is that every job is not a good job. A stop an hour away at your normal price is a favor, not a sale. Set a zone. Inside it, normal pricing. Outside it, a trip charge that covers the drive. Customers understand distance.

What Should I Read Next?

Related issue: protecting profit when costs keep rising. Back to the monthly countdown of small business problems.

Sources

Trade details come from Dr. Paul’s industry guides, linked above. Featured trades change monthly.

Real world ends here. The Fabled Forest begins.

How Does a Fabled Forest Hauler Stop Wasting Miles?

A Fabled Forest Story: Dani and the Zigzag Day

Doctor Owl was pumping up a flat tire on his little cart when Dumpster Dani’s box truck rattled to a stop beside him. It was piled high, as always.

“Load it up, it’s as good as there!” said Dani. “North ridge, then the marsh, then north ridge again.”

“Why the ridge twice, Dani?”

“Second customer called after I left the first.”

“And if they had called the day before?”

Dani thought about it for the length of one breath, which for her was a long time.

That night she laid a map on the hood and marked every stop from the past week. The lines crossed the forest like a spider web. She had driven past the same oak nine times.

The next week, Dani took orders by noon for the following day. Ridge stops went on ridge days. Marsh stops went on marsh days. Anyone who needed it sooner paid a rush fee.

She used less fuel and got home before dark twice.

The lesson: plan the stops before you start the engine.

More stories like Dani’s are in Dr. Paul’s Fabled Forest Business School Series.

Illustration only. Dani and her truck are made up. Crossing your own route twice a day is real.

What Else Do Owners Ask About Fuel Costs?

Should I add a fuel surcharge?

A clear trip charge based on distance is easier for customers to accept than a surcharge that changes every month. Either way, explain it up front.

Is routing software worth it for a small business?

It can be once you run several stops a day. Log a week by hand first so you know what you are trying to improve.

I am planning a mobile business. How big should my service area be?

Start smaller than you think. A tight area you can serve well beats a wide one that keeps you on the road.

Good on the Job Site. Losing Money on the Drive?

Your crews know the work. What nobody mapped out is how they get to it. Dr. Paul helps owners who run routes turn drive time back into paid time. Log one vehicle this week. If the numbers surprise you, his business consulting services can take it from there, and the pricing page shows the rates.

Book a Free 15-Minute Call

You can also text (321) 948-9588.

Dr. Paul Borosky, DBA, MBA, Business Consultant and author

About the Author

A business consultant and author, Dr. Paul Borosky, DBA, MBA, wrote Dr. Paul’s Fabled Forest Business School Series. He earned an MBA in Finance at Webster University and a DBA at National University. His client list tops 1,000 small businesses in 50 states and Canada. He reads a route map the way others read a budget. Meet Dr. Paul or find his books on Amazon.

Scroll to Top