Home › Who We Help › Welding and Fabrication › Training a New Welder

Dr. Paul Borosky, DBA, MBA, Business Consultant
Dr. Paul Borosky, DBA, MBABusiness Consultant

How Do I Train a New Welder in My Shop?

Your new welder can run a decent bead on flat plate. But the stair stringer that has to land square, the vertical-up fillets on a column base plate and the trailer tongue that has to be true to the axle? Those still come to you, every time, because the know-how lives in your head and your hands. You mean to teach him, but there is always a customer waiting. So you weld, and he grinds. Two years from now, nothing will have changed. Business consultant Dr. Paul Borosky, DBA, MBA, has advised more than 1,000 small businesses and helps shop owners get the skill out of their heads.

Call or text (321) 948-9588. Your first 15-minute call is free.

Last Updated: November 2026

Doctor Owl in Plain English

How Do I Train a New Welder in My Shop?

Write your hard jobs down as job cards and test new welders on practice pieces before customer parts. Each card shows the machine settings, joint prep, fit-up, weld sequence and photos of good and bad results. A new welder runs coupons for that joint until they pass a cut-and-bend or visual test in your shop, then does the job with you watching, then alone. Teach one job card at a time.

How This Guide WorksThis guide starts with three steps, then a story where Silas the Salamander of Salamander Seam Works writes down how he mends the tricky joints, Dr. Paul’s view, what goes on a job card, the path from coupon to customer part and what to say on day one. More stories like Silas’s are in Dr. Paul’s Fabled Forest Business School Series.

What to Do

How Do I Turn My Skills Into Job Cards?

Building the training system follows three stages: Dr. Paul’s Organize-Plan-Grow™ Strategy.

1. Organize

List the jobs that only you can do. Rank them by how often they come in.

2. Plan

Write a job card for the top three, with settings, prep, sequence and photos. Make practice coupons for each joint and set your pass test.

3. Grow

Train one card at a time: coupons until they pass, then the job with you watching, then alone. Add a card every month.

Hiring your first welder? Write your first three job cards before the first day. The welding and fabrication business plan template has a staffing section to plan from.

Lead welder? Write one job card a month from the jobs you know best. You are teaching the next lead welder.

Doctor Owl Teaches

Why Did Silas Write Down How He Mends Tricky Joints?

Only Silas Knows

Doctor Owl was writing out the steps for mending a torn page, with a drawing for each one, so the young helpers could do it without him.

Silas the Salamander sat by the window, tired. “Every tricky joint still comes to me,” he said. “The newt can join two flat bars. But the curved rails, the cart hitches, the gate hinges? Only I know how.”

“How did you learn them?”

“Slowly. By ruining a lot of iron.”

“Then let the newt ruin scraps instead of rails,” said Doctor Owl.

That night, Silas wrote down how he made a cart hitch. How hot the forge, how he set the pieces, which side he joined first. He drew a good joint and a bad one.

The next morning he gave the young newt a pile of scrap iron and the card. “Make this joint until it holds when I bend it.”

It took the newt nine tries. On the tenth, the joint bent without cracking. Then the newt made a real hitch with Silas watching. Then the next one alone.

By winter, Silas had five cards on the forge wall. The newt knew three.

In the library, the young helpers mended torn pages all afternoon. Doctor Owl read in the corner.

The lesson: write down what only you know, and let new hands practice on scraps before they touch the real work.

Silas and the young newt are from the Fabled Forest. The owner who does every hard weld himself is real.

Dr. Paul Borosky, DBA, MBA, Business Consultant

Dr. Paul’s Take

If It Is Only in Your Hands, It Is Not a Shop

Owners say teaching takes longer than doing it themselves. For one job, they are right. Dr. Paul counts the year: every hard weld the owner does is a quote not written, a customer not called and a weekend not off. A stack of job cards and a test bench turn the owner’s skill into the shop’s skill. Building that system is the work in Dr. Paul’s business organization consulting.

Job Card

What Goes on a Welding Job Card?

  • The part, material and thickness.
  • Process, wire or rod, gas and machine settings.
  • Joint prep and fit-up, with tolerances.
  • Tack and weld sequence, to control distortion.
  • Photos of a good weld and common mistakes.
  • How the joint is checked before it ships.

Coupon to Customer

When Is a New Welder Ready for Customer Parts?

Skill shows up in pay. The middle half of welders earned between $22.50 and $30.29 an hour in 2025, per BLS data on My Next Move. Each job card a welder can do alone moves them up that range.

StageWhat happensMoves on when
CouponsPractice the joint on scrapPasses your visual and bend test
WatchedDoes the real job with you thereOne clean job, no rework
AloneDoes the job alone; you check the resultThree clean jobs in a row
TeachesShows the next welder the cardCard signed off

What to Say

What Should I Tell a New Welder on Day One?

“Here are the job cards on the wall. You will learn them one at a time, on scrap first. Every card you pass alone counts toward your next raise, and the pay steps are written down so you can see them. Nobody here learns on a customer’s part.”

What Else Do Shop Owners Ask About Training Welders?

How do I test welds in a small shop?

Visual checks and a simple cut-and-bend test on practice coupons work for most shop jobs. Structural or code work needs testing to the code your customer requires.

Should new welders get certified?

For code work, yes. Under AWS D1.1, your shop qualifies each welder to your written procedure, often with a CWI watching. Keep the records current: a welder who goes six months without using a process must test again.

How long does it take to train a welder on a new job?

It depends on the joint and the welder. Track coupons to pass for each card; it tells you which cards need better steps.

Should pay go up as welders learn?

Yes. Tie raises to job cards passed, so welders can see what the next step is worth.

How does Dr. Paul help?

He helps you pick the first job cards, sets up the coupon-to-customer path and checks progress monthly.

This is one of six guides for welding and fabrication shop owners. See them all on the Welding and Fabrication page.

Training taking forever in your business? See the Allentown business consultant page.

Training only helps if you can find people to train. See how fabrication shops replace retiring welders.

Which Weld Could Only You Do This Week?

That is your first job card. Bring a list of your owner-only jobs to a free 15-minute call. Dr. Paul builds training systems with shop owners in business organization consulting. Check the pricing page for rates.

Write Your First Job Card

Or call or text (321) 948-9588.

Dr. Paul Borosky, DBA, MBA, Business Consultant and author

About the Author

Author of Dr. Paul’s Fabled Forest Business School Series, Dr. Paul Borosky, DBA, MBA, has advised more than 1,000 small businesses across all 50 states and Canada. He holds a DBA from National University and an MBA in Finance from Webster University. Meet Dr. Paul or browse his books on Amazon.

Sources

Scroll to Top