Home › Current Small Business Issues › AI and Technology

Where Should a Small Business Start With AI?
Two tools. Two logins. Zero hours saved. If that sounds familiar, the tools are not the problem. You picked software before you picked a task. Dr. Paul Borosky, DBA, MBA, Business Consultant, starts the other way around, with one repetitive job, a starting number and a 30-day test. Below, three trades show where a first test belongs and how to tell if it worked.
Stage 2 of 3: Plan
Start with one repetitive task, measure it, and run a small test before you buy anything else. Choosing that task is a Plan decision, stage two in the three stages of Dr. Paul’s Organize-Plan-Grow™ Strategy. You already know your work. The decision is which piece to hand to a tool and how to judge the result. A business consultant picks the task with you, sets up the pilot and compares the real savings to the cost.
Call or text (321) 948-9588. The first 15-minute call is free.
Doctor Owl in Plain English
What Is the First Thing I Should Do With AI?
Pick one job you do over and over, like writing quotes or answering the same email. Time how long it takes now. Try one tool on only that job for 30 days, and check its work. If it saves real time, keep it. If not, cancel it. One task, one test.
New here? Doctor Owl is a character from Dr. Paul’s Fabled Forest books. His short answers on this site are real business advice.
The Full Answer
What Are the Steps to Start Using AI?
Keep it small and measured.
- List what you already pay for. Cancel any tool nobody has opened in two months.
- Pick one repetitive task. Good first choices are drafting quotes, answering common emails or writing up job notes.
- Time it before you change anything. You need a starting number to know if the tool helped.
- Run a 30-day test with a person checking. Review every output before it reaches a customer.
- Compare time saved to cost. If the tool saves more than it costs, keep it and pick a second task. If not, cancel it.
What This Means for Your Business
Where Does AI Fit in Different Kinds of Businesses?
A tool does not change how work gets done. People do. If the steps stay the same, the tool is one more screen to check and one more monthly fee. AI also makes mistakes with total confidence, so someone has to review its work. The best first task is different in every trade.
In HVAC and plumbing
The pain is the phone and the schedule. Calls come in after hours, urgent jobs bump planned ones and the board gets rewritten all day. Answering and booking are repetitive, which makes them a good place to test. The guide on keeping the schedule from falling apart covers the rules a tool would have to follow.
In pet grooming
The pain is the empty slot. A no-show costs a groom you cannot sell again. Reminders and rebooking messages are the same words sent over and over. See the guide on reducing no-shows.
In a coffee shop or bakery
The pain is the leftover tray. Deciding how much to bake is a daily guess, and the register already holds the answer. Turning sales history into a bake plan is a strong first job for a tool. The guide on reducing bakery waste shows the numbers to pull.
A plumber, a groomer and a baker do not need the same tool. They need the same habit: pick the task that repeats the most and costs the most, and start there.

Dr. Paul’s Take
Fewer Tools, Used Well
Dr. Paul’s view is that most small businesses do not have an AI problem. They have a too-many-tools problem. Before adding one, list what you already pay for and who uses it. Cancel what nobody opens. Then test one new thing properly.
What to Measure
What Number Shows Whether a Tool Is Working in My Trade?
Three measures apply to any tool: net time saved (checking included), how often its output had to be corrected and the total monthly cost of everything you subscribe to. If a tool costs more than the time it saves, cancel it. Then judge the test by the number your trade already cares about.
| Trade | Benchmark to watch | How to read it |
|---|---|---|
| HVAC and plumbing | Missed calls and schedule bumps per week | Log both for two weeks before you change anything. And relax about being behind: only 12% of trades businesses have built AI into their processes, per ServiceTitan. |
| Pet grooming | No-show rate, reviewed weekly | A typical grooming no-show rate runs 5% to 15%, according to MoeGo. Know yours first, then see if reminders move it. |
| Coffee and bakery | Leftover count at close, by item and weekday | In one cafe studied for Oregon DEQ, about 18% of pastries baked each day went unsold. Count yours for two weeks. |
Each of these is a number the owner can count by hand before any software arrives. That starting count is the whole test. Without it, you are judging a tool on a feeling.
No trade here? Time one repetitive task three times, write down the average and measure again after 30 days with the tool.
How a Business Consultant Can Help
How Does AI Integration Consulting Get You Started?
The service for this is Dr. Paul’s AI integration consulting. It helps owners apply AI to repetitive tasks such as quotes, scheduling, follow-ups and paperwork, built into how the business already runs.
The first step is a map of the repetitive work that fills your days and weeks, to find where the time goes. Then, with the staff who do that work, Dr. Paul picks two or three tasks to start with, chooses tools that fit, sets a standard for checking the AI’s output and writes the steps down. Rollout comes with training and a count of hours saved and errors caught. What works stays. What does not gets dropped.
Here is how that looks in each trade.
- HVAC and plumbing: the starting tasks are after-hours call handling and booking, with written rules for what counts as an emergency.
- Pet grooming: the starting tasks are reminders and rebooking messages, with a person handling anything that involves a complaint.
- Coffee and bakery: the starting task is a daily bake plan built from register sales, checked by the baker before the ovens go on.
You also get rules for what information is allowed into an AI tool. The work happens on site or over Zoom.
Tools that fit your business, a standard for checking their work, written steps and rules for what information goes into AI tools.
Current signal: the rank for AI and technology this month is on the top 10 small business problems countdown.
Start Here
What Is My First Move?
Choose one task you repeat every week. Time it three times and write down the average before you look at any tool.
Still planning? Do not buy software for a business that does not exist yet. Write the plan first. A business plan template shows which tasks you will have.
Running the place for someone else? You know which task eats your week. Time it and bring that number to the owner with a tool to try.
What Should I Read Next?
Related issue: protecting your business from payment fraud. Return to this month’s top 10 small business problems.
Sources
- ServiceTitan, 2026 State of AI in the Trades.
- MoeGo, Does Rebooking Reduce No-Shows?
- Oregon Department of Environmental Quality, Oregon Wasted Food Study, Case 15.
Trade details come from Dr. Paul’s industry guides, linked above. Featured trades change monthly.
The real-world part is done. Now for the Fabled Forest.
How Does a Fabled Forest Technician Decide What to Hand to a Machine?
Doctor Owl was sliding beads on an old abacus at the flea market when Alton the Ant marched up under a stack of schematics.
“We need an upgrade!” said Alton. “I have rented Aphrie by the hour. She will run the whole shop.”
“The whole shop, Alton? Which part first?”
Alton had not picked a part.
“Which job do you do most often and like least?”
“Repair tickets,” said Alton. “I write forty a week. By hand.”
“How long does one take?”
Alton did not know. So he timed three. Then he walked to the Wire office and asked Aphrie to draft the next ten.
Her discs clicked. “The approach is underdeveloped,” she said, and produced ten tickets anyway. Eight were right. Two had the wrong customer.
Alton kept the test going for a month, checking every ticket before it went out. The writing time fell by half. He canceled the rest of her hours and kept just that one job.
The lesson: hand over one task, check the work, then decide on the next.
More stories like Alton’s are in Dr. Paul’s Fabled Forest Business School Series.
Illustration only. Alton and Aphrie are characters. Paying for tools that save no time is real.
Which Other Questions Come Up on AI and Technology?
Will AI replace my employees?
In most small businesses it takes over pieces of jobs, not whole jobs. The time saved usually goes to work that was being skipped.
Is it safe to put customer information into an AI tool?
Check the tool’s privacy terms first, and ask an IT specialist if you handle sensitive data. When in doubt, leave customer details out.
I am planning a new business. Should I build AI into it from day one?
Plan the work first. Once you know which tasks repeat, test a tool on the one that takes the most time.
Master of Your Trade. Buried in Software?
You did not learn your craft to spend evenings comparing apps. Still, the right tool on the right task can hand you hours back. Dr. Paul helps busy owners pick one place to start and measure whether it worked. Time one task this week. If you want the pilot set up for you, his business consulting services and rates are listed.
You can also text (321) 948-9588.
